1. Cracks in Drywall
- Cause: Settling of the house, temperature changes, or structural movement.
- Solution: Use drywall tape and joint compound to seal cracks, then sand and repaint.
2. Nail or Screw Pops
- Cause: Shifting wood framing or improper installation.
- Solution: Remove the loose fastener, drive a new screw nearby, and patch the surface.
3. Water Damage
- Cause: Leaks or high humidity levels.
- Solution: Identify and repair the source of moisture, replace the damaged drywall, and repaint.
4. Dents and Dings
- Cause: Everyday wear and tear, moving furniture, or accidental impact.
- Solution: Fill dents with spackle, sand smooth, and repaint.
5. Peeling Paint or Bubbling
- Cause: Moisture trapped under the paint layer.
- Solution: Scrape off the affected area, sand, apply a primer, and repaint.
6. Sagging Drywall Ceilings
- Cause: Incorrect installation, water damage, or inadequate support.
- Solution: Reinforce the area with screws or replace the sagging section.
7. Poor Taping or Seams Showing
- Cause: Improper taping techniques during installation.
- Solution: Reapply joint compound, sand the area, and tape correctly.
8. Mold Growth on Drywall
- Cause: Excessive moisture or poor ventilation.
- Solution: Remove the moldy section, treat with a mold-killing product, and improve ventilation.
9. Corner Bead Damage
- Cause: Accidental impact on drywall corners.
- Solution: Replace the damaged corner bead, apply joint compound, and repaint.
10. Texture Issues (Popcorn, Orange Peel, etc.)
- Cause: Aging texture or damage to the surface.
- Solution: Patch or respray the texture to match the existing finish, or remove and smooth it for a modern look.